
- description
-
Jura Membrane Regulator
Pressure regulator. Includes 2 black/red o-rings to seal the PTFE tube connection. O-RING NUMBERS 0010718 AND 0010721.
This is the frequently replaced item in all Jura machines.
The Membrane Regulator islocated at the exit of the CP3 Pump and controls the line pressure; thus, the water flow is uniform and the pump is quieter. The pump will increasingly get louder if the Membrane Regulator is not functioning properly. It is one of the most commonly replaced parts due to scale build-up and broken O-Rings. It also is the easiest internal part to replace. Use pliers to release the Hair Pin Clip. Turn the Membrane Regulator counter-clockwise to release it from the Pump and make sure the Pump O-Ring is removed with the Membrane Regulator. The female threads inside the Pump may be slightly worn in older machines. Compatible Models
C5, C9, C60,
E8, E9, E50, E80, E85,
F5, F7, F9, F50, F60,
C1300, C1500, C3000,
S7, S8, S9, S90, S95
Z5, Z6,
J5, J6,
X70, X90,
ENA 3, ENA 4, ENA 5, ENA 9.
Jura Error Code
FILL SYSTEM
Jura Membrane Regulator Replacement Video Tutorial
-
- review
Jura Membrane Regulator
Pressure regulator. Includes 2 black/red o-rings to seal the PTFE tube connection. O-RING NUMBERS 0010718 AND 0010721.
This is the frequently replaced item in all Jura machines.
Compatible Models
C5, C9, C60,
E8, E9, E50, E80, E85,
F5, F7, F9, F50, F60,
C1300, C1500, C3000,
S7, S8, S9, S90, S95
Z5, Z6,
J5, J6,
X70, X90,
ENA 3, ENA 4, ENA 5, ENA 9.
Jura Error Code
FILL SYSTEM